Clarion NX501A - Remote Control Operations

11NX501A
English
English
Owner’s Manual
5. REMOTE CONTROL
Replacing the batteries
1. Press the retention tab and pull out the battery tray
and remove the old battery.
2. Insert the new CR2025 battery and slide the battery
tray back in the remote control the same direction
that you removed it.
Please ensure the tray is inserted in the correct
direction.
Note:
Using batteries improperly can cause them to explode.
Take note of the following points:
•Whenreplacingbatteries,replacebothbatterieswith
new ones.
•Donotshort-circuit,disassembleorheatbatteries.
•Donotdisposeofbatteriesintofireorflames.
•Disposeofspentbatteriesproperly.
WARNING
Lithium (CR) battery contain
Perchlorate
Dispose of discharged batteries properly.
Signal transmitter
Operatingrang:30°inalldirections
[ / ]
[0-9]
[SRCH]
[BACK]
[ , , , ]
[TITLE]
[ ], [ ]
[ZOOM]
[MUTE]
[AUDIO]
[POWER / SRC]
[VOLUME]
[SET]
[PIC]
[TA]
[RPT]
[ ], [ ]
[SUB.T]
[OPEN]
[ANGLE]
[NAVI / AV]
[MENU]
[BAND]
[ROOT]
[ENT]
NX501A_Usermanual_EN-CAP_0304.indd 11 2011-3-11 16:41:09