Clarion NX501A - 17 Aux 1; aux 2 Operations; 18 Camera Operations

45NX501A
English
English
Owner’s Manual
17. AUX 1 / AUX 2 OPERATIONS
External peripheral devices, including a game console, camcorder, iPod/iPhone, etc. can be connected to the
AUX1 or AUX 2 connector on the front or back of this unit using the A/V media cables.
Switching to AUX IN / AV IN mode
• Press[AUX 1] or [AUX 2] button on Main Menu to select desired mode (when unit is connected). If the external
device connected to AUX 1or AUX 2 input have audio signal, the unit will broadcast audio of external device.
• Press[Menu] button on Operational Panel to return to the Main Menu.
You cannot directly control external devices connected to AUX 1or AUX 2 input.
18. CAMERA OPERATIONS
Switching to Camera mode
Press [Camera] button on Main Menu to select desired mode.
The LCD will display the external camera video. The screen will display “No Video Signal” menu, if a valid camera
is not connect to this head unit.
Press Menu button on Operational Panel to return to the Main Menu.
Note:
Ifthereversecableisconnectedcorrectlytothecar,thecenterunittoswitchtocameramodeautomaticallywhenthe
car is in reverses.
NX501A_Usermanual_EN-CAP_0304.indd 45 2011-3-11 16:41:27