74 NX501A English
Modify the basic software parameters set during the initial setup
process. For details, see page 7.
Delete all saved data and reset all settings to their factory defaults.
4.3.1 Sound and Warnings
Button Description
Tap this button to adjust the volume of the different sounds in the
application. A new screen shows the different sound types and
their controls. See below for details.
This button shows the current voice guidance profile. By tapping
the button, you can select a new profile from the list of available
languages and speakers. Tap any of these to hear a sample voice
prompt. Just tap
when you have selected the
new spoken language.
Maps may contain information about the speed limits of the road
segments. Clarion Mobile Map is able to warn you if you exceed
the current limit. This information may not be available for your
region (ask your local dealer), or may not be fully correct for all
roads in the map. This setting lets you decide whether you wish to
receive visible and/or audible warnings.
Adjust the slider to set the relative speed above which the
application initiates the warning.
The following alert types are available:
x Audio
warning: you receive a verbal warning when you
exceed the speed limit with the given percentage.
x Visual warning: the current speed limit is shown on the
map when you exceed it.
If you prefer to see the speed limit sign on the map all the time
(normally it is shown only if your speed exceeds it), you can set it
here.
This feature allows you to receive a warning when approaching a
Road Safety Camera. You must ensure on your own liability that
using this feature is legal in the country where you intend to use it.
This button is not displayed when GPS position is not available or
if you are in certain countries where road safety camera warning
is prohibited. Even if the button is available, you are responsible
for checking whether it is legal to use this feature at your location.
To Next Page
Loading...
