Clarion NX501A - Postal Code Address Search

34 NX501A English
3.1.1.6 Entering an address with a postal code
All of the above address searching possibilities can be performed with entering the postal
code instead of the settlement name. Find below an example with a full address:
1. If you are on the Map screen, tap
to return to the Navigation
menu.
2. In the Navigation menu, tap the following buttons:
, .
3. Select the country and state as described earlier (page 26).
4.
Enter a new city/town/suburb using its postal code:
a. Tap
.
b. Tap
to open the numeric keypad.
c. Start entering the postal code.
d. Find the city/town/suburb you need:
x The most likely postal code is always shown in the input field. To accept
it, tap
.
x If the desired number does not show up, open the list of results by
tapping
. Select the postal code from the list.
5. Enter the street name:
a. Tap
.
b. Start entering the street name on the keyboard.
c. Find the street you need:
x The most likely street name is always shown in the input field. To accept
it, tap
.
x If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
). Select
the street from the list.