57NX501A
English
English
Owner’s Manual
3. General Cautions
1. Do not open the case. There are no user- serviceable
parts inside. If you drop anything into the unit during
installation, consult your dealer or an authorized
Clarion service center.
2. Use a soft, dry cloth to clean the case. Never use
a rough cloth, thinner, benzine, or alcohol etc. For
tough dirt, apply a little cold or warm water to a soft
cloth and wipe off the dirt gently.
4. Cautions on Installation
1. Prepare all articles necessary for installing the
source unit before starting.
2.Installtheunitwithin30°ofthehorizontalplane.
(Figure 2)
3. If you have to do any work on the car body, such as
drilling holes, consult your car dealer beforehand.
4. Use the enclosed screws for installation. Using
other screws can cause damage. (Figure 3)
NX501A
Figure 2
Figure 3
Chassis Chassis
Damage
Max. 8 mm (M5 screw)
NX501A_Usermanual_EN-CAP_0304.indd 57 2011-3-11 16:41:33
To Next Page
Loading...
