Clarion NX501A - Checking the Details of the Current Position (Where am I?)

22 NX501A English
With this function you can save the active route for later
use.
My Route / More /
Save Route
With this function you can replace the active route with a
previously saved route.
My Route / More /
Load Route
With this function you can search for Places of Interest in
various different ways.
Find / Find Places
(page 36)
This button opens the Map screen and starts simulating
the active route.
My Route / More /
Simulate Navigation
(page 65)
This button opens the GPS Information screen with
satellite position and signal strength information.
Tap the top of the
Map screen when
there is no GPS
reception
This button offers your Home location as a destination.
2.2.6 Checking the details of the current position (Where Am I?)
This screen contains information about the current position (or about the last known position if
GPS reception is not available) and a button to search for useful Places nearby.
.
You can access this screen from the map in one of the following ways:
x If the current street is displayed below the Vehimarker (the current position on the
map), tap it to open the Where Am I? screen.
x Open the Quick menu and tap the
button.
Information on this screen:
x
, : Latitude and Longitude (coordinate of the current position in WGS84
format).