Clarion NX501A - Wiring Cautions and Connections; Wiring Safety Precautions

60 NX501A
English
Owner’s Manual
6. Cautions on Wiring
1. Be sure to turn the power off before wiring.
2. Be particularly careful where you route the wires.
 Keepthemwellawayfromtheengine,andexhaustpipe,etc.Heatmay
damage the wires.
3. If the fuse should blow, check to see if the wiring is correct.
If a fuse is blown, replace it with a new one of the same amperage rating as
the original (15A FUSE).
4. To replace the fuse, remove the old fuse on the back of the unit and insert
the new one. (Figure 7)
NOTE:
There are various types of fuse holder. Do not let the battery side touch other metal
parts.
Figure 7
Fuse (15A FUSE)
After the connection, fix the cord by a clamp
or insulation tape for protection.
Fuse holder
CAUTION
NX501A_Usermanual_EN-CAP_0304.indd 60 2011-3-11 16:41:33