39
The module programming routine will be exited if:
● The door is closed.
● The ignition is turned on.
● The override switch is pressed too many times.
● More than 15 seconds elapses between programming steps.
One long siren chirp indicates that the module programming routine has been exited.
feature menus
The default settings are indicated in bold type. Features that have additional settings that can be pro-
grammed using the Pro Security Programmer are indicated with an asterisk (*).
menu #1 - basic features
FEATURE NUMBER ONE-CHIRP SETTING (DEFAULT) TWO-CHIRP SETTING
1-1 Active arming Passive arming
1-2 Arm/disarm chirps ON Arm/disarm chirps OFF
1-3 Ignition lock ON* Ignition lock OFF*
1-4 Ignition unlock ON Ignition unlock OFF
1-5 Active locking only Passive locking
1-6 Panic with ignition ON No panic with ignition ON
1-7 0.8 second door lock pulses 3.5 second door lock pulses
1-8 Forced passive arming ON Forced passive arming OFF
1-9 Automatic engine disable ON Automatic engine disable OFF
1-10 Armed When Driving (AWD) ON AWD OFF
1-11 Anti-code grabbing ON Anti-code grabbing OFF
To Next Page
Loading...
