Clarion SR1000 - Menu #2 - Advanced Features; Menu #3 - Remote Start Options

40
menu #2 - advanced features
menu #3 - remote start options
FEATURE ONE-CHIRP SETTING (DEFAULT) TWO-CHIRP SETTING
3-1 Engine checking ON Engine checking OFF
3-2 Engine checking TACH Engine checking VOLTAGE
3-3 Run time: 12 minutes* Run time: 24 or 60 minutes*
3-4 Parking lights flashing Parking lights constant
3-5 Crank time: 0.6 seconds 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0,
4.0 sec.
3-6 Voltage check - high Voltage check - low
3-7 Short Run/Turbo–1 min. 3, 5, 10 min.
3-8 Activation pulse count–1 Activation pulse count: 2
3-9 2
nd
Ignition/Acc output: ignition Accessory
3-10 Acc state during wait to start: OFF ON
3-11 2
nd
status output: Normal Rear defogger: latch 10 min./pulse
3-12 Anti grind: ON Anti grind: OFF
FEATURE NUMBER ONE-CHIRP SETTING (DEFAULT) TWO-CHIRP SETTING
2-1 Siren output constant Siren output pulsed
2-2 30 second siren duration* 60 second siren duration*
2-3 False Alarm Prevention Circuitry ON False Alarm Prevention Circuitry OFF
2-4 Progressive door trigger Instant door trigger
2-5 Disarm from Override, 1 pulse Disarm from Override, 2-5 pulses
2-6 Door sensor bypass chirp ON Door sensor bypass chirp OFF
2-7 Ignition controlled domelight ON Ignition controlled domelight OFF
2-8 Single unlock pulse Double unlock pulse
2-9 Factory disarm with Channel Two ON Factory disarm with Channel Two OFF
2-10 Channel Four validity Channel Four: latched/latched, reset
with ignition/30-sec. timed/60-sec.
timed/90-sec. timed
2-11 Channel 5 Validity Channel Five: latched/latched, reset
with ignition/30-sec. timed
/60-sec. timed/90-sec. timed