2 – 10
2 DIGITAL INPUTS : It shows the digital input values.
1. DRIVE DIGITAL INPUTS. It indicates the driving ON/OFF.(It contains
lower modes)
i. FORWARD : It indicates the forward ON/OFF.
ii. REVERSE : It indicates the reverse ON/OFF.
iii. FSI : It indicates the Foot switch ON/OFF.
iv. SPEED CUT BACK 1 : It indicates the speed limit ON/OFF.
v. BYPASS : It indicates the BYPASS ON/OFF.
vi. EXIT (ENTER) : It moves to the higher mode.
2. HYD DIGITAL INPUTS : It indicates the hydraulic ON/OFF. (It contains
lower modes)
i. TILT : It indicates the TILT ON/OFF.
ii. REACH : It indicates the REACH ON/OFF.
iii. OPTIONAL : It indicates the OPTIONAL ON/OFF.
iv. EXIT (ENTER) : It moves to the higher mode.
3. EXIT (ENTER) : It moves to the higher mode.
3 CONTACTOR REQUESTS : It indicates the input signal of contactor
1. FORWARD CONTACTOR : It indicates the input signal of forward
contactor.
2. REVERSE CPNTACTOR : It indicates the input signal of reverse
contactor.
3. REGEN CONTACTOR : It indicates the input signal of regenerative
contactor.
4. DRIVE BYPASS CONTACTOR : It indicates the input signal of drive
bypass contactor.
5. HYD BYPASS CONTACTOR : It indicates the input signal of hydraulic
bypass contractor.
6. EXIT (ENTER) : It moves to the higher mode.
13. DRIVING AND OPERATING
To Next Page
Loading...
