2 – 11
4 SYSTEM PARAMETERS: It shows all the parameters set on the controller.
1. VEHICLE PARAMETERS : It shows the parameters set on the vehicle.
i. VEHICLE MAX SPEED : It indicates the maximum speed of vehicle.
ii. BDI WARNING LEVERL : It indicates the warning value of battery.
iii. BDI CUTOUT LEVER : It indicates the value on each level of battery.
iv. EXIT (ENTER) : It moves to the higher mode.
2. DRIVE PARAMETERS : It shows all the drive parameters. (It contains
lower modes)
i. DRIVE CURRENT LIMIT : It indicates the driving current limit.
ii. DRIVE CUTBACK 1 SPEED : It indicates the driving speed limit.
iii. ACCELERATOR DELAY : It indicates the accelerator delay.
iv. EXIT (ENTER) : It moves to the higher mode
3. HYD PARAMETERS: It shows all the hydraulic parameters.
i. HYD CURRENT LIMIT : It indicates the hydraulic current limit.
ii. HYD TILT SPEED LIMIT : It indicates the hydraulic tilt speed limit.
iii. HYD REACH SPEED LIMIT : It indicates the hydraulic reach speed
limit.
iv. HYD OPTIONAL SPEED LIMIT : It indicates the hydraulic optional
speed limit.
v. EXIT (ENTER) : It moves to the higher mode.
4. HOURS: It shows all the set hours. (It contains lower modes)
i. WORK HOURS : It indicates the work hours.
ii. DRIVE HOURS : It indicates the drive hours.
iii. HYD HOURS : It indicates the hydraulic hours.
iv. KEY HOURS : It indicates the key ON hours.
v. EXIT (ENTER) : It moves to the higher mode.
5. EXIT (ENTER) : It moves to the higher mode.
5 EXIT (ENTER) : It moves to the higher mode.
13. DRIVING AND OPERATING
To Next Page
Loading...
