EasyManuals Logo

Clarke Image 26B User Manual

Clarke Image 26B
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Page -20- Clarke
®
Operator's Manual IMAGE 26B
The machine does not move. The Power switch is off. Turn on the "Power" switch.
The traverse switch is defective. Contact an authorized Clarke
service person
There is no solution flow. Solution control dial in wrong position. Turn dial to position for more flow.
The solution tank is empty. Fill the solution tank.
There is an obstruction in the Remove the obstruction from the hose
solution hose or filter. or filter.
Solenoid is defective. Contact an authorized Clarke
Service person
Pump is defective. Contact an authorized Clarke
Service person.
Batteries are too low. Charge unit.
The machine doesn't extract The recovery tank is full. Drain the recovery tank.
solution from the floor.
The recovery tool is not Lower and/or adjust the tool.
resting on the floor.
Filter screen plugged Clean screen and replace.
The cleaning is not even. The brush is worn. Replace the brush.
There is damage to the brush Contact an authorized Clarke
module or spray assembly. Service person.
service person.
The solution level is low. Fill the solution tank.
Batteries are too low. Recharge batteries.
Uneven or no spray from nozzles. Dirty or plugged spray nozzles. Clean the spray assembly or nozzles.
Worn spray nozzles. Replace spray assembly or nozzles.
Water leaks from the spray Debris in the check valve. Contact an authorized Clarke
service person.
nozzles with the pump "OFF".
Defective check valve. Contact an authorized Clarke
service person.
There is no suction. The vac motor is not running. Turn vac motor switch on.
Vacuum hose obstruction. Remove the obstruction.
Vac hose damaged. Replace the hose.
The dome gasket worn or damaged. Replace the gasket.
Motor brushes are worn. Replace motor brushes.
Loose motor connection. Contact an authorized Clarke
service person.
Vac motor switch defective. Contact an authorized Clarke
service person.
Brush does not run or runs Batteries are too low. Charge Batteries.
intermittently.
How to Correct Problems in the Machine
Action
Problem
Cause

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarke Image 26B and is the answer not in the manual?

Clarke Image 26B Specifications

General IconGeneral
BrandClarke
ModelImage 26B
CategoryFloor Machine
LanguageEnglish

Related product manuals