EasyManuals Logo

Clear-Com ICS-102 User Manual

Clear-Com ICS-102
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Clear-Com Communication Systems
ICS-102/62 Intercom Panel Instruction Manual
1-4
IN-USE TALLY INDICATOR
If a selector is assigned to a label and another panel is currently using
that label, the LED will double-flash once per second to indicate the
label is in use. This tally must be enabled from the configuration
software.
TELEPHONE OFF-HOOK TALLY INDICATOR
When a telephone interface is assigned to a talk selector, the talk LED
will flash once per second if that telephone is off the hook. This tally
must be enabled from the configuration program.
RADIO RECEIVER ACTIVE TALLY INDICATOR
When a two-way radio interface port is assigned to a talk selector, the
LED will flash once per second when that radio’s receiver is active.
This tally must be enabled from the configuration program.
PANEL CONNECTED TALLY INDICATOR
This tally is used when a panel is connected to the frame by a
high-speed data line (such as an ISDN or T1 line) that might be
inactive periodically. The red LED of any talk selector associated with
that panel will flash once per second when the panel is on-line. This
tally must be enabled from the configuration program.
AUDIO PRESENCE TALLY INDICATOR
When a label is assigned to a listen selector, the LED will flash once
per second to indicate someone is talking on that channel. This tally
must be enabled from the configuration program.
ANSWER-BACK FACILITY
The primary function of the answer-back facility is to answer calls from
other panels or interfaces not assigned to a panel’s selectors.
The following sections describe the use of the answer-back facility.
ANSWER BACK SELECTOR
You use the Answer Back selector to answer calls from panels and
interfaces that are not assigned to your panel.
When a call from a panel or interface not assigned to the panel arrives:
• The calling panel’s label will be placed in the answer-back stack.
• The red LED will flash.
These two conditions will continue until the call is answered, or until
the answer-back time-out period lapses and the caller’s label is

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clear-Com ICS-102 and is the answer not in the manual?

Clear-Com ICS-102 Specifications

General IconGeneral
BrandClear-Com
ModelICS-102
CategoryIntercom System
LanguageEnglish

Related product manuals