Clear-Com ICS-102 User Manual

Clear-Com Communication Systems
ICS-102/62 Intercom Panel Instruction Manual
4-1
SPECIFICATIONS
Note: 0 dBu is referenced to 0.775 V RMS
ICS-102/62
Front-Panel Controls and Connectors
Talk/Listen Switches: 10 (ICS-9102, ICS-102T)
6 (ICS-62, ICS-62T)
Function Keys 2 toggle keys; 4 functions
Answer Back Switch 1
Volume Controls 1
Headset Connector 1 D4M XLR
Panel Mic Connector 1-1/4 inch Phone Jack
Rear-Panel Connectors
Miscellaneous DB-15F
To Matrix DB-15M
Audio IO (OPT-100) DB-15F
Accessory DB-9F
AC Power IEC-320
Panel Microphone Input
Type: Electret
Input Level 40 dBv
Impedance 200 Ohms
Headset Microphone Input
Type Dynamic
Input Level -55dBv
Gain Adjustment Range +/- 5dB
Impedance 200 Ohms
Local Program Input
Type Electronically Balanced
Impedance 8k Ohms Bridging
Level 0 dBv will produce full
output of speaker when
volume control is fully clockwise
Headphone Outputs
Impedance 50 to 600 Ohms
Power 1/2 W into 50 Ohms
4

Clear-Com ICS-102 Specifications

General

Brand	Clear-Com
Model	ICS-102
Category	Intercom System
Language	English