Clear-Com ICS-102 User Manual

Clear-Com Communication Systems
ICS-102/62 Intercom Panel Instruction Manual
1-6
SPEAKER ON SELECTOR
This selector functions only when a headset is plugged into the panel.
To toggle the speaker on and off, push the Speaker On selector. The
LED indicates when the speaker is on.
MIC ON SELECTOR
This selector activates the panel or headset microphone, whichever
has been selected. The LED indicates when the microphone is on. If a
talk is activated while the microphone is off, it will turn on.
LISTEN LEVEL SELECTOR
The Listen Level selector has four functions:
• Activating the listen-level mode
• Resetting the listen-level settings
• Sending call signals
• Releasing auto-answered telephone lines
Listen-Level Mode
To use the listen-level adjust mode, push (for less than 1 sec.) and
quickly release the Listen Level selector.
The LEDs of all active listen selectors will begin to flash to indicate the
function is on.
Note: Only active selectors can be adjusted in listen-level mode.
Use the selector associated with the intended label to increase (up) or
decrease (down) the volume.
To exit, push the Listen Level selector or wait for the 3 sec. time-out.
Note: If the active listen path is pushed higher than the maximum
value, the other paths will be driven down so that the
desired path has more emphasis.
Listen Level Reset
To reset the Listen Level to default settings:
1. Press (for less than 1 sec.) and quickly release the Listen Level
selector.
2. Press and hold the Listen Level selector for 3 sec.
3. Release the Listen Level selector.

Clear-Com ICS-102 Specifications

General

Brand	Clear-Com
Model	ICS-102
Category	Intercom System
Language	English