Clear-Com Communication Systems
ICS-102/62 Intercom Panel Instruction Manual
1-1
OPERATION
INTRODUCTION
This manual describes how to use the ICS-102 and ICS-62 intercom
panels and their digital equivalents, the ICS-102T and ICS-62T
intercom panels. Panel operators can use this manual after the Eclipse
System has been correctly installed and configured.
DESCRIPTION
The ICS-102/102T and ICS-62/62T intercom panels are each
assembled in a small, 1-RU high (1.75 in. or 44.45 mm) chassis. The
ICS-102/102T has ten selectors while the ICS-62/62T has six. Each
panel has the following features:
• Individually adjustable listen levels
• Fits in one rack unit (1.75 inches or 44.45 mm) of a standard
equipment rack
• Built-in speaker and optional plug-in panel microphone
• Front-panel headset connector
• Call signalling capability
• Answer Back facility
• Local program input without front-panel control
• Programmable relay
• Mute relay
• Two logic inputs for external control of selected panel functions
The panel can both be equipped with the following options:
• XPL-12 and XPL-22 Expansion Panels
• OPT-100 Auxiliary Audio Output.
This chapter describes
how to operate the
ICS-102 and ICS-62
intercom panels and
the ICS-102T and
ICS-62T digital
panels.
1
To Next Page
Loading...
