Clear-Com ICS-102 User Manual

Clear-Com Communication Systems
ICS-102/62 Intercom Panel Instruction Manual
v
IMPORTANT SAFETY
INSTRUCTIONS
For your safety, it is important to read and follow these
instructions before operating an ICS-102/62 intercom station:
(1) WARNING: To reduce the risk of fire or electric shock, do not
expose an ICS-102/62 intercom station to rain or moisture. Do not
operate an ICS-102/62 intercom station near water, or place objects
containing liquid on it. Do not expose an ICS-102/62 intercom station
to splashing or dripping water.
(2) For proper ventilation, make sure ventilation openings are not
blocked. Install the ICS-102/62 according to the directions in the
Installation Chapter of this manual.
(3) Do not install an ICS-102/62 intercom station near a heat source
such as a radiator, heat register, stove, or other apparatus (including
amplifiers) that produces heat. Do not place naked flame sources such
as candles on or near an i-station.
(4) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades, with one blade wider than the
other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
(5) Protect the power plug from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the i-station’s chassis.
(6) Only use attachments/accessories specified by Clear-Com
Communication Systems.
(7) Unplug the ICS-102/62 station during lightning storms or when
unused for long periods of time.
(8) Refer all servicing to qualified service personnel. Servicing is
required when:
• The ICS-102/62 station has been damaged in any way, such as
when a power-supply cord or plug is damaged.
• Liquid has been spilled or objects have fallen into the ICS-102/62
station’s chassis.
• The ICS-102/62 station has been exposed to rain or moisture.
• The ICS-102/62 station does not operate normally.
• The ICS-102/62 station has been dropped.
Please familiarize yourself with the safety symbols in Figure 1. When
you see these symbols on an ICS-102/62 intercom station, they warn
Please read and follow
these instructions
before operating an
ICS-102/62 intercom
station.

Clear-Com ICS-102 Specifications

General

Brand	Clear-Com
Model	ICS-102
Category	Intercom System
Language	English