EasyManua.ls Logo

Clek Foonf 2017 - Installing Rear-Facing Car Seat with LATCH

Clek Foonf 2017
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
Installing Rear-Facing Car Seat With LATCH
WARNING — DEATH or
SERIOUS INJURY can occur
• Only use the car seat LATCH system in vehicle seating locations
designated by the vehicle manufacturer for use with LATCH and that have
a standard anchor spacing of 11 in. (280 mm).
• Rear-Facing LATCH Connectors must be secured to the vehicle LATCH
lower anchors only. Connection to other vehicle anchors or vehicle
components could result in the anchor tearing free in a crash.
• NEVER attach more than one LATCH Connector to a vehicle lower anchor
unless recommended by the vehicle owner’s manual for that vehicle.
• Do NOT install by this method for a child
weighing more than 25 lb (11.4 kg).
LATCH

Table of Contents

Related product manuals