Clek Foonf 2017 - Removing Rear-Facing Car Seat Installed with Vehicle Belt

52
Step 1
Unbuckle vehicle belt.
• Pressing down in center of car seat to
reduce tension on vehicle belt will make
it easier to unbuckle vehicle belt as
shown in Figure 69.
Step 2
Remove Seat Cushion, see “Removing/
Installing Seat Cushion” on page 83.
Step 3
Open both Rear-Facing Belt Lock-offs as
shown in Figure 70.
Remove vehicle belt from Rear-Facing
Belt Path.
Step 4
Remove this car seat from vehicle.
Step 5
Install Seat Cushion, see “Removing/Installing
Seat Cushion” on page 83.
Removing Rear-Facing
Car Seat Installed With Vehicle Belt
Figure 70
Figure 69