EasyManua.ls Logo

Clek Foonf 2017 - Installing Forward-Facing Car Seat with LATCH

Clek Foonf 2017
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
Installing Forward-Facing Car Seat With LATCH
WARNING — DEATH or
SERIOUS INJURY can occur
• NEVER leave this car seat unsecured in your vehicle. This car seat must
remain secured even when not in use. In a sharp turn, crash or sudden
stop, an unsecured car seat can be thrown around and could severely
injure vehicle occupants.
• Only use this car seat LATCH system in vehicle seating locations
designated by the vehicle manufacturer for use with LATCH and that
have a standard anchor spacing of 11 in. (280 mm).
• Rigid LATCH Connectors must be secured to the vehicle LATCH lower
anchors only. Connection to other vehicle anchors or vehicle components
could result in the anchor tearing free in a crash.
• NEVER attach more than one LATCH connector to a vehicle lower anchor
unless recommended by the vehicle owner’s manual for that vehicle.
• ALWAYS secure the Top Tether provided with this car seat when
installing Forward-Facing with Rigid LATCH. NEVER use this car seat,
when installing Forward-Facing with Rigid LATCH without the Top Tether.

Table of Contents

Related product manuals