Clek Foonf 2017 - Removing;Installing Seat Cushion

83
Figure 129
TO REMOVE REAR-FACING BASE
Step 1
Place the car seat on a clean, stable surface
with the inside of the seat facing down.
Step 2
Pull Rear-Facing Base Release Lever away
from the car seat and move the Rear-Facing
Base up to release it as shown in Figure 129.
STEP 1 STEP 2
2
3
1
STEP 1 STEP 2
2
3
1
WARNING — DEATH or
SERIOUS INJURY can occur
• NEVER use this car seat without the Seat Cushion in place.
Removing/Installing Seat Cushion