73
Step 1
Loosen Top Tether by pressing and holding
Tether Adjuster while pulling strap as shown
in Figure 109.
Step 2
Remove Tether Hook from vehicle tether
anchor.
• Pull in and hold retention spring on
Tether Hook, then remove Tether
Hook from tether anchor as shown in
Figure 110.
Step 3
Unbuckle vehicle belt.
• Pressing down in center of car seat to
reduce tension on vehicle belt will make
it easier to unbuckle vehicle belt as
shown in Figure 111.
Removing Forward-Facing Car
Seat Installed With Vehicle Belt
Figure 109
Figure 110
Figure 111
To Next Page
Loading...
