Clek Foonf 2017 - To Shorten the Shoulder Harness Webbing

33
Step 2
Route Shoulder Harness Straps under bottom
of seat back cover (1) as shown in Figure 36.
Step 3
Attach the Metal Harness Plate to the loop
closer to the end of the Shoulder Harness
Strap by sliding Harness Strap into slot in
Metal Harness Plate as shown in Figure 37.
TO SHORTEN THE SHOULDER
HARNESS WEBBING
To make the Harness smaller, attach the
Metal Harness Plate to a loop further in from
the end of the Shoulder Harness Strap as
shown in Figure 38.
IMPORTANT: If installing Forward-Facing
without a Top Tether, and with children
under 40 lb (18.1 kg), ALWAYS use
shorter Shoulder Harness Strap length.
1
Figure 36
Figure 37
Figure 38