45
Step 4
Remove Rear-Facing LATCH Connectors from
vehicle lower anchors.
• Press and hold red release button while
pulling Rear-Facing LATCH Connector as
shown in Figure 57.
• Repeat to remove Rear-Facing LATCH
Connector on opposite side.
Step 5
Remove this car seat from vehicle.
Step 6
Store the Rear-Facing LATCH Belt, see “Rear-
Facing LATCH Storage” on page 87.
Step 7
Install Seat Cushion, see “Removing/Installing
Seat Cushion” on page 83.
Figure 57
To Next Page
Loading...
