Modules
Wireless LAN Module 7 - 23
7
Wireless LAN Module
If you have included an
Intel
®
WLAN or 3rd party module
in your purchase op-
tion, make sure that the Wireless LAN module is on b
efore installing the driver.
Use the
Fn + F11
key combination, or Control Center button
,
to toggle power to the
Wireless LAN module.
Make sure you install the drivers in the order indicated in
Table 4 - 1, on page 4 - 3
.
The operating system is the default setting for Wireless
LAN control in Windows 7.
Note that for the Intel, and one of the 3rd party, WLAN & Bluetooth Combo mod-
ules you need to install both the WLAN & Bluetooth drivers.
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F11 key com-
bination to toggle power to
the WLAN module, and
check the LED to see if the
module is powered on or
not (see Table 1 - 5, on
page 1 - 15/Table 1 - 2, on
page 1 - 9).
To Next Page
Loading...
