Modules
7 - 80 Intel® Rapid Storage Technology Driver
7
Intel® Rapid Storage Technology Driver
Install the Intel® Rapid Storage Technology to support your SATA drive if set up
in AHCI mode in the BIOS (see “SATA Mode (Advanced Menu)” on page 5 - 9)
or if you have set up your hard disks in a RAID configuration (see“Setting Up SATA
RAID or AHCI Mode” on page 7 - 2).
1. Insert the Device Drivers & Utilities + User’s Manual disc into the CD/
DVD drive.
2. Click Option Drivers (button).
3. Click
7.Install IRST Driver
> Yes
.
4. Click Next > Next > Yes > Next > Next.
5. Click Finish to restart the computer (you will need to restart the system
again after the computer has rebooted).
If you have an Solid State Drive (SSD) module included in your purchase option
you may configure Intel® Smart Response Technology for your system (see
over).
To Next Page
Loading...
