Clevo P170HM

Disassembly
2 - 4 Disassembly Steps
2.Disassembly
Disassembly Steps
The following table lists the disassembly steps, and on which page to find the related information. PLEASE PERFORM
THE DISASSEMBLY STEPS IN THE ORDER INDICATED.
To remove the Battery:
1. Remove the battery page 2 - 5
To remove the HDD from the Primary Bay:
1. Remove the battery page 2 - 5
2. Remove the HDD page 2 - 6
To remove the Optical Device:
1. Remove the battery page 2 - 5
2. Remove the Optical device page 2 - 9
To remove the HDD from the Secondary Bay:
1. Remove the battery page 2 - 5
2. Remove the HDD page 2 - 10
To remove the Primary System Memory:
1. Remove the battery page 2 - 5
2. Remove the system memory page 2 - 12
To remove the Secondary System Memory:
1. Remove the battery page 2 - 5
2. Remove the keyboard page 2 - 14
3. Remove the system memory page 2 - 15
To remove the WLAN Module:
1. Remove the battery page 2 - 5
2. Remove the keyboard page 2 - 14
3. Remove the wireless LAN page 2 - 16
To remove and install a Processor:
1. Remove the battery page 2 - 5
2. Remove the processor page 2 - 17
3. Install the processor page 2 - 19
To remove and install a Video Card:
1. Remove the battery page 2 - 5
2. Remove the video card page 2 - 20
3. Install the video card page 2 - 21
To remove the Microphone:
1. Remove the battery page 2 - 5
2. Remove the HDD page 2 - 6
3. Remove the Optical device page 2 - 9
4. Remove the HDD page 2 - 10
5. Remove the system memory page 2 - 12
6. Remove the processor page 2 - 17
7. Remove the video card page 2 - 20
8. Remove the microphone page 2 - 22