CLIVET TALK User Manual

Data creazione 10/09/03 DS03I009GB--00 Pagina 31 di 59
Configuration Unit_1
ModComp1
Add Code Description UOM Pass
40/CEN U1_Mcomp1
Type of compressors, module 1 unit 1
2
42/CEN U1_RecoverEn1
Enable recovery, compressor module 1 unit 1
2
Configuration Unit_1
ModComp2
Add Code Description UOM Pass
43/CEN U1_Mcomp2
Type of compressors, module 2 unit 1
2
44/CEN U1_RecoverEn2
Enable recovery, compressor module 2 unit 1
2
Configuration Unit_1
ModComp3
Add Code Description UOM Pass
45/CEN U1_Mcomp3
Type of compressors, module 3 unit 1
2
46/CEN U1_RecoverEn3
Enable recovery, compressor module 3 unit 1
2
Configuration Unit_1
ModEvap
Add Code Description UOM Pass
47/CEN U1_MEvap Enable evaporator module 1
Used to define the presence or absence of the module
2
71/CEN U1_Weightprobe Weight on average Out
Used to define the influence, as a percentage, of the evaporator water
outlet temperature, in the calculation of the average unit outlet
temperature, if the water flow-rates in the various evaporators are not
equal.
% 2
Configuration Unit_1
Various
Add Code Description UOM Pass
48/CEN U1_VentilType Type of ventilation, unit 1
Ventilation independent from the ventilation of the other compressor
modules, or in common. (The fans operate at the highest speed
corresponding to the various compressor modules connected)
2

CLIVET TALK Specifications

General

Brand	CLIVET
Model	TALK
Category	Controller
Language	English