CLIVET TALK User Manual

Data creazione 10/09/03 DS03I009GB--00 Pagina 32 di 59
Configuration Unit_2
ModComp1
Add Code Description UOM Pass
49/CEN U2_Mcomp1
Type of compressors, module 1 unit 2
2
50/CEN U2_RecoverEn1
Enable recovery, compressor module 1 unit 2
2
Configuration Unit_2
ModComp2
Add Code Description UOM Pass
51/CEN U2_Mcomp2
Type of compressors, module 2 unit 2
2
52/CEN U2_RecoverEn2
Enable recovery, compressor module 2 unit 2
2
Configuration Unit_2
ModComp3
Add Code Description UOM Pass
53/CEN U2_Mcomp3
Type of compressors, module 3 unit 2
2
54/CEN U2_RecoverEn3
Enable recovery, compressor module 3 unit 2
2
Configuration Unit_2
ModEvap
Add Code Description UOM Pass
55/CEN U2_MEvap Enable evaporator module 2
Used to define the presence or absence of the module
2
72/CEN U2_Weightprobe Weight on average Out
Used to define the influence, as a percentage, of the evaporator water
outlet temperature, in the calculation of the average unit outlet
temperature, if the water flow-rates in the various evaporators are not
equal.
% 2
Configuration Unit_2
Various
Add Code Description UOM Pass
56/CEN U2_VentilType Type of ventilation, unit 2
Ventilation independent from the ventilation of the other compressor
modules, or in common. (The fans operate at the highest speed
corresponding to the various compressor modules connected)
2

CLIVET TALK Specifications

General

Brand	CLIVET
Model	TALK
Category	Controller
Language	English