CLIVET TALK User Manual

Data creazione 10/09/03 DS03I009GB--00 Pagina 33 di 59
Configuration Unit_3
ModComp1
Add Code Description UOM Pass
57/CEN U3_Mcomp1
Type of compressors, module 1 unit 3
2
58/CEN U3_RecoverEn1
Enable recovery, compressor module 1 unit 3
2
Configuration Unit_3
ModComp2
Add Code Description UOM Pass
59/CEN U3_Mcomp2
Type of compressors, module 2 unit 3
2
60/CEN U3_RecoverEn2
Enable recovery, compressor module 2 unit 3
2
Configuration Unit_3
ModComp3
Add Code Description UOM Pass
61/CEN U3_Mcomp3 Type of compressors, module 3 unit 3 2
62/CEN U3_RecoverEn3 Enable recovery, compressor module 3 unit 3 2
Configuration Unit_3
ModEvap
Add Code Description UOM Pass
63/CEN U3_MEvap Enable evaporator module 3
Used to define the presence or absence of the module
2
73/CEN U3_Weightprobe Weight on average Out
Used to define the influence, as a percentage, of the evaporator water
outlet temperature, in the calculation of the average unit outlet
temperature, if the water flow-rates in the various evaporators are not
equal.
% 2
Configuration Unit_3
Various
Add Code Description UOM Pass
64/CEN U3_VentilType Type of ventilation, unit 3
Ventilation independent from the ventilation of the other compressor
modules, or in common. (The fans operate at the highest speed
corresponding to the various compressor modules connected)
2

CLIVET TALK Specifications

General

Brand	CLIVET
Model	TALK
Category	Controller
Language	English