Cloos qineo PULSE MASTER-Plus - Page 24

24
MA_QN_MP
Operation
The following options are available in the space management:
• Save job
• Save job with name
• Delete job
• Job off (if job is loaded and active)
• Save job
1. Using the rotary knob, select "Save job" in the space management
and confirm your selection by pressing the knob.
• A list of the storage spaces will appear.
2. Select a storage space using the left rotary knob and confirm your
selection by pressing the knob.
• The current parameter settings are now stored in the selected
storage space and the start screen appears.
Parameters already saved in the field are replaced with new values.
• Save job with name
1. Using the rotary knob, select "Save job with name" in the space
management and confirm your selection by pressing the knob.
• A list of the storage spaces will appear.
2. Select an empty storage space using the left rotary knob and con-
firm your selection by pressing the knob.
• An input mask appears. The following functions can be opened us-
ing the rotary knob:
Function Description
ABC - abc -
SYM
Changes the display of the letters from upper case to
lower case and to numbers and symbols
<C Deletes the symbol before the cursor in the entry field
<>
When active, using the rotary knob, the cursor can be
moved horizontally in the entry field.
Ueber/Einf
(OVR/INS)
When "Ueber (OVR)" is active, the field on which the
cursor is placed is overwritten.
When "Einf (INS)" is active, the writing will appear in
the field to the left of the cursor.
3. Select the exit symbol using the rotary knob.
• The entry will be automatically saved.
NOTICE!