CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
WARNING:
Risk of injury due to axis movements!
Collision of people with components of the machine (Y-bridge, mobile unit,
rotary table with the work piece, tool) can lead to serious injuries.
• Keep anybody parts away from in-between the moving parts and end
stops of the axes.
• Do not grab in gaps between adjacent components of linear guides and
access adjacent components
• Perform work on the linear guides only at standstill.
• In the work area wear personal protective equipment.
DANGER:
Danger to life due to magnetic fields!
Magnetic fields of stepper motors can cause serious injury and even death and
substantial property damage.
• Persons with pacemakers must not go near the machine itself. The
function of the pacemaker may be affected.
• People with metal implants should not be in the vicinity of the machine
itself. Implants can heat up or be attracted
• Before servicing take off metal objects (jewellery, watches, writing
instruments, etc.).
• Do not bring any electronic devices in the vicinity of the magnetic
source. These could be damaged.
• No storage media, credit cards, etc. placed in the vicinity of the magnetic
source. Data can be deleted.
WARNING:
Injuries caused by falling materials!
In operation, chips, tools (or parts thereof) may fall uncontrollably down or may be
thrown out and cause serious injury to skin and eyes.
• Wear face shield or fully enclosed goggles, protective clothing, gloves and
safety shoes.
• If particles enter the eye, seek immediate medical attention.
To Next Page
Loading...
