CNC-Step S-400 T - Page 57

Operating Instructions
High-Z T-Series
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 57
Support: +49 (0)2831/91021-50
15.02.2014
Unexpected start of the machine
WARNING:
Risk of injury from unexpected starting of the machine!
The machine and the tools may start unexpectedly, change direction or stop. Limbs
can get captured.
• Make sure that no body parts enter the danger area of the machine.
• Secure work area from accidental access.
Highly inflammable substances
WARNING:
Fire hazard due to flammable materials!
Organic dusts from coal or wood or inorganic dust of magnesium, aluminium, zinc
or titanium can catch fire and cause serious or even fatal injuries.
• Within the danger zone and in the vicinity do not smoke. Do not use open
flames or sources of ignition.
• Keep fire extinguisher ready.
• • Processing of light metal alloys such as magnesium, aluminium, zinc and
titanium without suction and appropriate security measures is not allowed.
• Stop work immediately in case of fire. Evacuate danger area until the all-
clear is given.
Cooling emulsion
ATTENTION:
Risk of health damage by contact with cooling emulsion!
Contact with cooling emulsion can lead to health damage.
• Avoid skin contact.
• Remove the cooling emulsion immediately from the skin.
• Do not inhale vapours
Operation with coolant
HINT:
For more information, refer to the manufacturer's instructions of the coolant.