COBHAM 7516A - Page 133

98-175666-A Appendix D: Command line interface D-6
List of commands
D.2.10 system
D.2.11 test
D.2.12 iothub
Command Description
system
Shows detailed information of this specific command.
system restart
Sends a command to the BDU to restart the system
instantaneously. It makes a power-on self test and then points to
the last used satellite.
system info
Shows the software version, part names and serial numbers of the
SAILOR 1000 XTR Ka 4.5W.
Table D-11: UCLI command: system
Command Description
test
Shows detailed information of this specific command.
test frict
test frict [axis]: performs a friction test on given axis.
Omitted or a = AZI, e = ELE, x = XEL, * = All 3
Table D-12: UCLI command: test
Command Description
iothub
Shows detailed information of this specific
command.
iothub set
<hostname|deviceid|enable>
<value>
Sets iothub configuration parameters.
iothub read
<hostname|deviceid|enable>
Shows iothub configuration parameters
iothub_cert set <key|cert>
iothub_cert iothub certificate/private key
You have 30 s to enter the certificate key.
iothub_cert read
<key|cert>
Shows iothub certificate/private key
iothub_schedule set
<group> [parameter]
<value>
Sets iothub scheduler configuration
parameters.
iothub_schedule read
<group> [parameter]
<value>
Reads iothub scheduler configuration
parameters.
Table D-13: UCLI command: iothub