DVR Menu
4.2.9 Advanced
Reset: Reset all settings to factory default.
Import/Export: Export the parameters of your device onto a removable storage device.
a. Insert a USB ash drive up to 32GB into the rear of the DVR
b. Select the ‘Import’ or ‘Export’ button to import or export your DVR settings
4.3 Search
To access the ‘Search’ settings, select ‘Search’ from the Main Menu. Choose the tabs at the top to
switch between sub-menus. The ‘Search’ menu provides access to playback recordings and backup
to ash drive.
NOTE: The DVR may take some time to retrieve all of your recordings
Time Search:
Search for footage recorded on a given day.
a. On the right hand side, select the date to search, then press ‘Search’
b. Light blue bars indicate found recordings. Using the mouse, select a start time on the
display
c. Press the play button to commence playback
Event Search:
Search for motion events that the DVR has detected.
a. On the right hand side, select the date to search, then press ‘Search’
b. A list of detected motion recordings will be shown. Double-click on an entry to
commence playback
File Management:
Search for footage les that have been recorded by the DVR.
a. On the right hand side, select the date to search, then press ‘Search’
b. A list of footage les will be shown. Double-click on an entry to commence playback
NOTE: To delete recorded footage, select by ticking a le, then pressing the ‘Delete’ button. Press ‘OK’ to
conrm.
Image:
Search for images captured on the DVR.
a. On the right hand side, enter the start and end times to search, then press ‘Search’
b. A list of image les will be shown. Double-click on a le to view
To Next Page
Loading...
