6.4.4 Remote Cong
Use these settings to remotely congure your DVR’s settings. Select your DVR from the menu on
the left by double clicking with your computer’s mouse.
For advanced guides and video walkthrough, please refer to www.winplus.com.au
In order to view your DVR unit on a computer or mobile over the internet, you must setup your
DVR unit and modem / router as per the instructions in section 4.2.6 Networking. If you are still
having diculty viewing over the web, see the steps below.
IMPORTANT NOTE: In order to use networking features of this DVR unit, you must connect the DVR
unit to a high speed internet connection. To view on mobiles or tablets, your mobile network must
support mobile data at 3G or better recommended speeds. It is the user’s responsibility to ensure their
mobile coverage is suitable for use with the DVR unit. Winplus Australasia is not responsible for any
additional data charges that may be incurred. If possible, Winplus suggests connecting your mobile or
tablet via Wi-Fi before viewing remotely
7.1 Internet Explorer – ActiveX Settings
If you are receiving an ActiveX installation error, Internet Explorer’s security settings are blocking
you from installing the DVR unit client software. Follow the steps below to adjust the ActiveX
settings:
a. Open Internet Explorer
b. Click Tools > Internet Options
c. Click the Security tab
d. Click Internet
e. Click Custom Level...
f. Scroll down to ‘Download unsigned ActiveX controls’ and click ‘Prompt’
g. Under ‘Initialize and script ActiveX controls not marked as safe for scripting’, click ‘Prompt’
h. Click ‘OK’
i. When asked to conrm changes, click ‘Yes’
j. Enter your DVR unit’s IP address again and press Enter
k. Click the ActiveX installation box and choose install. The software will automatically
download and install
Networking - iVSS
Networking - PC
To Next Page
Loading...
