Codan 2110 series Getting Started Guide

Manpack Transceiver 2110 series Getting Started Guide 1
CODAN
Introduction
Thank you for purchasing a Codan 2110 series Manpack
Transceiver. With this great product and Codan’s supreme
after-sales support, you can look forward to many years of
clear and reliable HF communication. Please read this guide
thoroughly and retain it for future reference. There is an index
at the end of this guide to assist you in finding information.
The 2110 series Manpack Transceiver is a self-contained,
lightweight, waterproof and rugged communication system.
The 2110v Manpack Transceiver provides basic voice-only
operations. The 2110 Manpack Transceiver provides full voice
and data capabilities, interfaces with a 9350 Automatic Tuning
Whip Antenna, and may be interoperable with MIL-STD-188-
141B ALE.
Overview of this guide
This guide provides instructions on how to get started with
your 2110 series Manpack Transceiver. It assumes that you
have limited knowledge of HF communication and of using an
HF transceiver.
Extensive reference material is provided on the CD at the back
of this guide.
This guide contains the following sections:
Section 1 2110 series Manpack Transceiver compliance—
provides compliance information and safety
notices, and information on specific care and
safety requirements for your transceiver
Section 2 Your 2110 series Manpack Transceiver—shows
the components that make up your transceiver
Section 3 Preparing the transceiver for use—explains how
to check that the transceiver and battery pack
are ready for use

Codan 2110 series Specifications

General

Brand	Codan
Model	2110 series
Category	Transceiver
Language	English