2110 series Manpack Transceiver compliance
Manpack Transceiver 2110 series Getting Started Guide 5
European Radio and Telecommunications
Terminal Equipment Directive
The 2110 series Manpack Transceiver has been tested and
complies with the following standards and requirements
(articles of the R&TTE Directive):
• Article 3.1b: ETSI EN 301 489-1
• Article 3.1b: ETSI EN 301 489-15
• Article 3.2: Australian type approval according to
AZ/NZS 4770:2003
• Article 3.1a: assessed against ICNIRP and FCC
requirements
• Article 3.1a: EN 60950
Product marking and labelling
Any equipment supplied by Codan that satisfies these
requirements is identified by the , or
markings on the model label of the product.
Declaration of Conformity and Expert Letter of
Opinion
The CE Declaration of Conformity and Expert Letter of
Opinion for this product is listed on page 86, Associated
documents. This document can be made available upon
request to Codan or a Codan-authorised supplier.
0191 0191
To Next Page
Loading...
Need help?
General
