2110 series Manpack Transceiver compliance
8 Manpack Transceiver 2110 series Getting Started Guide
Electromagnetic compatibility
To ensure compliance with the EMC Directive is maintained,
you must:
1 Cover unused connectors with the protective caps
supplied to prevent electrostatic discharge passing
through your transceiver.
Electrical safety
To ensure compliance with the European Low Voltage
Directive is maintained, you must deploy and use the
2110 series Manpack Transceiver and antennas in accordance
with the instructions in the Manpack Transceiver 2110 series
Getting Started Guide, the Quick Reference Cards supplied
with each antenna, and the Manpack Transceiver 2110 series
Reference Manual.
When using equipment that is connected directly to the AC
mains these precautions must be followed and checked before
applying AC power to the unit:
1 Use the standard AC mains cable supplied.
1 Ensure the covers for the equipment are fitted correctly.
The 3121 AC Battery Charger and 3123 Fast AC Battery
Charger are double insulated and marked with .
CAUTION
If it is necessary for a qualified electronics
technician to remove the covers during
servicing, they must be refitted correctly
before using the charger.
WARNING
The protective cover must always be fitted
when the 3121 AC Battery Charger or
3123 Fast AC Battery Charger is connected
to the AC mains.
To Next Page
Loading...
Need help?
General
