Party500_V1013_EN.PDF http://www.codelight.com
6
2. Patch
After clearing all the data of the console, users need to patch the Units according to the connecting circumstance
of the fixtures, in order to use the 1-16 soft-keys with 5 pages. Before patching, user must make clear of the
model parameter of the Units and the present initial DMX address.
2.1. Patch the DMX Address
When patching fixtures, LCD screen will list the present patched addresses of the Units and give the
recommended DMX addresses automatically. Those free DMX addresses marked as Free.
You can also make your fixtures schedule for manual patching of the DMX address, the first line of the LCD
screen display the next DMX address to be patched, Control Wheel B changes available. If the DMX address had
patched, the number will twinkle, the console refuse iterative patching automatic.
2.2. Patch Fixtures
First of all, please fade in the Grand before using.
There are two types of Library in the console:
1. System fixture Library. The console has been uploaded the latest fixture library when it's on sale. You
can visit our website to download the newest library and upload it to your console.
2. User fixture Library. When you can't find the model of your fixtures in the System Fixture Library
you can build one yourself.
Note: Use the buttons to turn over the pages. You can use the English letter to fast skip to the initial
letter of the Manufacturer or the Model of the Fixture. Use the buttons to select the Manufacturer or
Fixture model.
Patch fixtures as followed:
Press the Patch in Function section to enter “Setup Patch”;
Press S1 [Fixture];
Select the fixture library;
Select fixture model;
The LCD display the patch state, free DMX addresses marked as Free;
Console will automatically patch the DMX initial address. If needed Control Wheel B change
available;
Select the Unit page, Press 1-16 buttons in Unit section to finish fixture patch;
Press Patch exit to “Live Mode”.
To Next Page
Loading...