Code Electronic Party 500 - Delete Document; View the Capacity of USB Flash Drive; Format the USB Flash Driver

To Next Page

To Previous Page

Party500_V1013_EN.PDF http://www.codelight.com

9.3.1. Delete Document

You can delete the documents of the inserted USB flash drive. Note: the documents can not be resumed

once deleted!

 Press S1 and enter “DEL File”;

 Use   to select the needed document;

 Press S1 [Confirm] to delete and it will take some times;

 Press S4 until return to the Live Show Mode.

9.3.2. View the Capacity of USB Flash Drive

You can check up the capacity of the inserted USB Flash Drive.

After pressed S2 [USB Space], the console will read the USB information and show the capacity and the

spare space of the USB flash drive on LCD screen.

9.3.3. Format the USB Flash Driver

You can format the USB driver in FAT or FAT32 format on the controller. It is the same as format it on PC.

If the USB flash driver is not in the FAT or FAT32 format, you have to format the USB flash driver by PC.

(Note: exFAT and NTFS format are not permitted).

Note: the memories of the USB flash drive will be eliminated once it is formatted!

Press S3 [Format USB], then press S1 [Confirm]. This operation can not change the format of USB driver,

but can quickly eliminate the memories of the USB flash driver.