Code Electronic Party 500 - Set up MIDI

Party500_V1013_EN.PDF http://www.codelight.com
28
10.2.2. Set Up MIDI
Party 500 can be used as a MIDI slave, thus MIDI Master can control its Playback program. It can also be
used as a MIDI master, when another Party 500 used as a MIDI slave. They are connected by MIDI cables
and work in Master-Slave mode. You should make sure the two devices share the same MIDI channel
before you use MIDI to control the console.
10.2.2.1. MIDI Device
 Press Setup;
 Press S3 [System];
 Press S2 [User setup];
 Press S2 [MIDI setup];
 Press S1 to switch between the 3 state:
MIDI device = Disable --- MIDI function closed;
MIDI device = Master ---- Party 500 is set to be the main device;
MIDI device = Slave ------ Party 500 is controlled by MIDI Master.
10.2.2.2. MIDI Channel
 Press Setup;
 Press S3 [System];
 Press S2 [User setup];
 Press S2 [MIDI setup];
 Press S2 [Set MIDIch];
 Use Control Wheel B to set MIDI channel number;
 Press S1 [Confirm];
 Press S4 to exit;
 Press Setup and return to Live Mode.
10.2.2.3. MIDI Order
Party 500 can deal with the related MIDI order:
 Order of setting up a Playback Page: $Bn xx (xx is the page NO.: 0~4);
 Order of running a Playback: $9n pp ll
pp = Playback Number (0 - 9, decimal)
ll = output level of the Playback (0-127, decimal, 127= Max.)
 Order of controlling the running: $An pp cc