Party500_V1013_EN.PDF http://www.codelight.com
2
1.2.1. Unit keys
Party 500 has 5 Unit pages,
each of which can be
patched to 16 Units, one
Unit button can patch one
Fixture. Thus, 80 Units can
be patched totally.
Unit buttons are the selecting button for the Units. Two functions of them are:
1. Select the Units;
2. Fast enter English letters and symbols.
1.2.2. Preset keys
Party 500 has 4 Preset pages, each of which has 10
Preset buttons. After patched, some of data is set by
fixture library, it can be set by user too.
There are two functions for the preset buttons:
1. Rapidly mix all kinds of data, to change colour, gobo or location of fixtures and etc.
2. English letter buttons.
1.2.3. Playback part
Cue/Playback section contains Playback pages, Flash
buttons and Playback faders.
Party 500 has 5 Playback pages, each of which
contains 10 Playback faders. Thus, it can memorize 80
Playbacks.
All the preset Cue and Chase need to be saved in the
Playback. You can use the faders to playback the
programmed Effects
Flash buttons, above the Playback faders, has two functions:
1. The Flash function of Playback. When you don’t fade in the Playback faders, you can press
and hold still the button to run the program, which shares the same effect if you fade in the
Playback faders. The program will be turned off as soon as you release the button.
2. Press Shift and one of the Flash buttons to switch the present effective, Control wheel B can
adjust the Playback speed of the right Playback program temporarily.
To Next Page
Loading...