Party500_V1013_EN.PDF http://www.codelight.com
11
4. Edit Preset
Party 500 has 4 Preset pages, each of which has 10 Preset buttons. User can save totally 40 preset data, which
named "Preset Table". After Patched, some preset were set (according to the data of fixture). You can set one or
more channel attribute values of fixtures to one preset button, which can be used quickly during live show or
programming.
After saved the preset, you can press preset button directly to quickly move the channel values, such as Brightness,
Colour, Gobo and Pan/Tilt Location.
There are two options when save preset:
1. [Changed CH] --- only save the attributes which were adjusted;
2. [All Stage] -------- save the whole scene of fixtures into the preset.
Example: Save the red colour of fixtures to the Preset section.
Adjust the selected fixtures attribute channel of Color to Red as the way of manually-controlling fixtures,
if there are several models of fixtures have been selected, you need to adjust them respectively.
After finishing edited, re-select those fixtures (their Unit buttons are on);
Press Edit Presets to enter “Edit Presets” mode. The led of the Preset buttons carrying data will twinkle;
Press S1 [Change CH];
Select a Preset button in Preset section to save the preset data (the led off means the Preset buttons is
empty);
Press Clear to clear the selected fixtures.
To Next Page
Loading...