Code Electronic Party 500 - 10 Setup the System; Data Clear; Clear All Data; Clear All the Preset Data

Party500_V1013_EN.PDF http://www.codelight.com
27
10. Setup the System
Update software of the console and internal data eliminate will be introduced in this part.
10.1. Data Clear
You can clear the internal data of the console, except Fixture Library.
 Press Setup;
 Press S3 [System];
 Press S1 [Clear Data];
There are 3 functions as followed you can choose to operate:
10.1.1. Clear all Data
Note: All the internal data, including Patch, Preset and Playback of the Units will be cleared, except
the uploaded library!
 Press S1 [Clear All];
 Press S1 [Confirm] to clear.
10.1.2. Clear All the Preset Data
It is use for clearing all the preset data.
 Press S2 [Clr Preset];
 Press S1 [confirm] to clear.
10.1.3. Clear All the Playback data
It is use for clearing all the playback data.
 Press S3 [Clr PLBK];
 Press S1 [Confirm] to clear.
10.2. User Setup
Language setup and MIDI are two parts of User Setup.
10.2.1. Set Up Language
 Press Setup;
 Press S3 [System];
 Press S2 [User setup];
 Press S1 and select the language displayed on the LCD screen.
 Press S4 [Cancel] to return to Live Mode.