CR2 User’s Manual Draft_022803_AS - 2
CR2 User’s Manual Draft_022803_AS - 3
1.2 - Unpacking
Remove the imager from its packing and inspect it for damage. If the scanner was damaged
during shipping, please call Code Corpration at (801) 495-2200.
The standard CR2 unit is shipped with a USB cable interface. The unit also features a battery
blank that must be installed in the unit at all times.
Various accessories are available for the CR2. An overview of these accessories can be found
on page 9.
Please keep your packing materials. The CR2 is shipped in an approved shipping container and
should be used if you ever need to return your equipment for servicing.
To Next Page
Loading...
