Code CR2 User Manual

CR2 User’s Manual Draft_022803_AS - 22
CR2 User’s Manual Draft_022803_AS - 23
2.6 - CR2 Feedback Denition Guide
The CR2 features two (2) LED’s on the front of the unit. These LED’s give a user feedback on
the various functionality of the unit. Each LED has a small icon underneath that represent the
following:
Battery Power Icon
Memory Icon
Each LED can show three (3) colors; Green, Amber or Red. The colors will vary depending on
the message the unit is sending.
• Green = 50% - 100% capacity of Battery or Memory
• Amber = 20% - 50% capacity of Battery or Memory
• Red = 0% - 20% capacity of Battery or Memory
The CR2 also emits beeps for feedback. Please follow the table below to better understand
your unit’s feedback.
CR2
Successfully
Powers Up
Attempting to
Decode
Sound
1 Beep
Battery
LED
Flash either
Green, Amber
or Red
None
Memory
LED
Flash battery
status either
Green, Amber
or Red
None
None

Code CR2 Specifications

General

Brand	Code
Model	CR2
Category	Barcode Reader
Language	English