CODEL Tunnel Tech 700 Series User Manual

Technical Manual CODEL
39
5.5. Vis_k: Displays Vis_k data.
 Use or to scroll through to Vis_k and press to select Vis_k.
The display returns to measurement screen displaying Vis_k
measurement.
5.6. Vis_m: Displays Vis_meter data.
 Use or to scroll through to Vis_m and press to select Vis_m.
The display returns to measurement screen displaying Vis_m
measurement.
5.7. Multi-gas: Displays Multi-gas data.
 Use or to scroll through to Multi-gas and press to select
Multi-gas. The display returns to measurement screen displaying Multi-
gas measurement.
5.8. Exit: To exit from Select Unit submenu.
 Use or to scroll through to Exit and press to exit. The display
returns to measurement screen.
6. Parameters: These are different identification and communication settings of
instrument and are read only. An overview of Parameters submenus is shown
below.
 Parameters
 ID
 Manufacturer
 Equipment
 Soft-Version
 Soft-Build
 Target Board
 Comms
 Comms
 Protocols
 Comms Address
Select Channel
Vis_k
1. Meas – 09:38:14
Vis: 0.0010k
Select Channel
Vis_m
1. Meas – 09:41:38
Vis: -1m
Select Channel
Multi-gas
1. Meas – 09:42:16
CO: 1.2 ppm
Select Channel
Exit
1. Meas- 09:55:14
CO: 0.2 ppm

CODEL Tunnel Tech 700 Series Specifications

General

Brand	CODEL
Model	Tunnel Tech 700 Series
Category	Measuring Instruments
Language	English