Technical Manual CODEL
58
Press to move cursor to next most significant
digit. Repeat above procedure to increment and
decrement and finally press to set 4mA DAC and
exit.
8.4.8. 20mA DAC: Allows user to set up range for 20mA DAC. The following
are the submenus.
20mA DAC
Set 20mA DAC
Use or to scroll through to 20mA DAC submenu.
8.4.8.1. Set Zero: Allows user to set range for 20mA DAC
Press to access and set up range for 20mA DAC.
Use or to change the zero range in
hexadecimal.
Press to move cursor to next most significant
digit. Repeat above procedure to increment and
decrement and finally press to set 4mA DAC and
exit.
To Next Page
Loading...
Need help?
General
