CODEL Tunnel Tech 700 Series User Manual

Technical Manual CODEL
65
8.7. EEPROM: Allows user to read and write data into memory. The following are
the sub menus.
 EEPROM
 Read 0xXXXX
 Write 0xXXXX to 0xXXXX
 Exit
 Use or to scroll through to EEPROM.
 Press to access Read sub menu. The first line is memory
location 0x7E80 and the second line is data 0x1234.
8.7.1. Read 0xXXXX: Allows user to read data from memory location. The
following are the sub menus.
 Read 0xXXXX
 Set Read Address.
 Press to Set Read Address.
8.7.1.1. Set Read Address: Allows user to enter memory location to read
data.
 Use or to increment or decrement most
significant digit in hexadecimal.
 Press to move cursor to next most significant
digit. Repeat above procedure to increment or
decrement and finally press to set read memory
location.
4. Setup Mode
4.8. EEPROM
READ: 0x7E80
0x1234
Set Read Address
0x0F80
Set Read Address
0x0F80
Set Read Address
0x0F80
Set Read Address
0x7F80
Set Read Address
0x0F80
Set Read Address
0x0F80
READ: 0x7F80
0x01F6

CODEL Tunnel Tech 700 Series Specifications

General

Brand	CODEL
Model	Tunnel Tech 700 Series
Category	Measuring Instruments
Language	English